plugin.dev.lab

Antlion / Components / View Axis

View AxisVIEWAXIS-001

Tags every axis with its number — a guide line running out from each axis point into a circle holding the axis name (A0, A1, ...). The numbers are the same ones Cut and Opening Cut expect in Axis From / Opening From, so you can read them here and leave those heavy previews off.

1Plan & setup
2Section
32D layout
43D solids
5Analysis

core Bowl Analysis 5 in · 5 out

Fig. 1 — PortsReads left, writes right
View Axis component in Grasshopper
Axis Object · itemThe axis system to label
Guide Length GuideNumber · itemHow far each tag line runs out from its axis point
Circle Radius Circle RNumber · itemRadius of the circle at the end of each tag line
Text Height Text HNumber · itemHeight of the axis name text inside each circle
Panel Values PanelObject · itemEvery value from Input Panel, as one bundle
Guide Lines GuidesCurve · listOne tag line per axis
Circles Curve · listThe circle at the end of each tag line, matching Guide Lines item for item
Labels Geometry · listThe axis name as bakeable text, centered in each circle
Label Names NamesText · listThe axis names as plain text, matching Circles item for item
Debug Text · itemDeveloper diagnostic output for tracking down bugs

Colored ports carry the chain from one component to the next. The rest are values you set once.

Inputs

  • AxisAxisThe axis system to label. Wire from Axis, or the pass-through on Stand 2D
  • Guide LengthGuideHow far each tag line runs out from its axis point (default 5000 mm)
  • Circle RadiusCircle RRadius of the circle at the end of each tag line (default 1500 mm)
  • Text HeightText HHeight of the axis name text inside each circle (default 800 mm)
  • Panel ValuesPanelEvery value from Input Panel, as one bundle. Anything you wire in yourself wins over it

Outputs

  • Guide LinesGuidesOne tag line per axis. Corner axes sharing a point are drawn once
  • CirclesCirclesThe circle at the end of each tag line, matching Guide Lines item for item
  • LabelsLabelsThe axis name as bakeable text, centered in each circle
  • Label NamesNamesThe axis names as plain text, matching Circles item for item
  • DebugDebugDeveloper diagnostic output for tracking down bugs. Copy this when reporting a problem
Component
VIEWAXIS-001
Ribbon
Bowl Analysis
Tier
core
Ports
5 in · 5 out
Version
1.0.11
Checked
2026-10-08